Specifications |
| Price ex factory (Queensland) |
$9250 + GST |
Model TSG-36 |
| Hitch |
Cat. I/II |
| Overall Length (estimated) |
2 metres |
| PTO driveline type |
Series 6 |
| PTO speed |
540 rpm |
| Driveline protection |
Slip clutch |
| Gearbox rating/ratio |
100 hp/1:1.46 |
| Cutting wheel construction |
Welded two piece laminated steel |
| Cutting wheel thickness |
19mm |
| Cutting wheel diameter |
914mm |
| Cutting wheel speed (approximately) |
788 rpm -
7430 ft./min |
| Number of teeth |
39 |
| Cutting teeth construction |
Carbide Steel Bolt In |
| Cutting height above ground |
450mm |
| Cutting depth below ground |
250mm |
| Maximum cut depth per pass |
200mm |
| Maximum horizontal cut |
830mm |
| Swing arc |
45-degrees |
| Minimum HP requirement |
45-PTO hp |
| Maximum HP |
100-PTO hp |
| Weight (est.) |
400kg |
