|
|
|
Sittler Turner Model #507, shown above, is ideal for medium size farm, municipal and industrial composting. |
Special housing encloses the bearings and shaft to protect the mechanisms from dust and debris.
Right hand shield is removable. PTO – right hand end is a shear bolt arrangement with shear bolt protection.
|
|
|
The gearbox has a secure protective plate. |
Water tank hook up allows for efficient watering.
Moisture levels should be maintained at 50 to 60% to encourage appropriate microbial activity. |
|
|
|
Viewed in transporting mode |
|
Sittler 512 |
Watering Provision |
|
|
Optional on 507 - 509 |
1” (25mm) or 2” (50mm) Plumbing |
Specifications |
Sittler 507 |
sittler 509 |
sittler 512 |
| Total Width |
2900 mm |
4200 mm |
5300 mm |
| Rotor Length |
2100 mm |
2700 mm |
3600 mm |
| Total Weight |
1361 kg |
2050 kg |
2270 kg |
| Tyre Size |
240 x 380 mm |
450 x 660 mm |
300 x 405 mm |
| Tractor Horsepower ## |
30-60 hp |
60-85 hp |
85-120 hp |
| PTO Speed |
540 rpm |
540 rpm |
540 rpm |
| Rotor Speed |
223 rpm |
270 rpm |
270 rpm |
| Hydraulic outlet required |
1 |
2 |
2 |
| Speed required |
Creeper |
Creeper |
Creeper |
| Minimum speed required |
275-350 m/hr |
275-350 m/hr |
275-350 m/hr |
| Self propelled option |
No |
Hydraulic Assisted |
Hydraulic Assisted |
| Output cubic metres/hr |
450 m2 |
900 m2 |
1375 m2 |
| Watering provision |
Optional 1" or 2" |
Optional 1" or 2" |
Optional 1" or 2" |
| Fleece Roller |
Optional |
Optional |
Optional |
| Base Selling Price $AUD ** |
$29,990 |
$41,525 |
$53,700 |
| Hydraulic Assisted Optional Models |
$59,375 |
$71,555 |
| ** Prices exclude GST and freight from Australian Port of entry costs. |
| ** Prices quoted are valid as at 12.01.07 – Prices may change without notice |
| ** Prices may vary due to the fluctuations of the $AUD against $USD. A Formal quote available from the RCE office on request. |
## Note: Recommended HP is listed as a guide only - HP can vary from model to model and will be affected by the creeper gear and/or hydrostatic drive of each tractor. Operating machinery must have a Creeper Gear or a ground speed of down to 15 and up to 20 Feet (4.5 to 6.1 Meters) Per Minute, as per the manufacturer’s manual.
Any SITTLER Windrow Turner being operated with machinery more than 20HP over specification shown above will have limited warranty. |
|
