|
The Toughest Brush Clearing Device Available Anywhere! Anything else is just........WIMPY!!
Unleash the power of your high flow hydraulics on this monster. Until just the past few years this product could not even exist because the auxiliary flow rates and pressures of the machines would not provide enough power to run it. With the modern machines pushing 40 GPM and 4000 PSI, someone had to produce a product that could harness that power and create a mower that could cut through the heaviest of material. Well, here it is!
Unleash the power of your hydraulics on this monster.
Recycle & Composting Equipment recon this is the workhorse of the skid steer industry. Built to push over small trees and brush, and then mulch them up. This attachment is not for everyone, but if you need a 60" (1.5m) skid steer mower that will survive even the most severe applications, then look no further than Recycle & Composting Equipment.
Over the past few years, many customers have approached Recycle & Composting Equipment about getting a version of this skid steer brush cutter that can be used on low flow skid steer models. Recycle &Composting Equipment is happy to announce that we are now supplying a low flow version available. It is special order at this time so expect to wait up to 4 weeks, but you can now order them.
This is the same mower deck and drive mechanism that has made this mower famous except it comes with a smaller motor to allow you to attach it to low flow skid steers. It will cut similarly to the High Flow version except the material cuts will be smaller. Be aware that this mower weighs 750Kg. You still need to have a machine large enough to lift the mower.
Now everyone can have "The Toughest Brush Clearing Device Available Anywhere!"
Anything else is just........WIMPY!!
fEATURES AND SPECIFICATIONS |
|
Cutter Width = 1.5m |
|
Overall Width = 1.8m |
|
Capacity = 125mm (low flow) 200mm (Hi Flow) |
|
Height = 1.2m |
|
Length 1.6m |
|
18 to 25 gpm (Low Flow Skid Steers) |
|
30 to 45 gpm (Hi Flow)(*May require additional motor for higher flow and pressure.) |
|
Weight – 750Kg |
|
Note: Due to high pressure and rate of flow operation, a case drain must be installed on the skid steer if not equipped by the owner prior to use. |
|
